Capture of H2S and SO2 in MOFs


Date: Thursday 1 October 2020
Time:  15:00 BST (16:00 CEST)
Duration: 30 mins plus Q&A

Dr. Ilich A. Ibarra
Associate Professor 
Instituto de Investigaciones en Materiales, UNAM,
Circuito exterior Ciudad Universitaria C.P. 04510, Ciudad de México

Dr. Vladimir Martis
DVS Product Manager
Surface Measurement Systems

Join us for this in-depth session to explore the ‘Capture of H2S and SO2 in MOFs‘. Delivered by a renowned guest presenter, Dr. Ilich A. Ibarra, this webinar will explore the use of MOFs in the capture of H2S and SO2, and give insight into two highly chemically-stable MOF materials that can be used for this purpose.

This session is not to be missed by anyone working in this field of research, join the webinar free now!


Hydrogen sulphide (H2S) is a harmful chemical present in natural gas, biogas and emitted by different chemical industries, e.g., oil desulfurization process at oil refineries. H2S is considered as a major air pollutant due to its negative environmental impact, mainly associated with acid rain, and to high toxicity to humans leading to severe nervous system illnesses.

On the other hand, sulphur dioxide (SO2) considered as one of the most hazardous chemicals is a colourless, non-flammable gas with a strong odour. SO2 provokes severe health issues including alterations of the respiratory system (e.g., broncho-constriction in lung function). Typically, an exposure to only 1.5 ppm of SO2 for a few minutes can cause a temporary incapability to breath normally. Moreover, this
chemical is highly soluble in water and forms sulphurous acid further converted to sulfuric acid, the main component of acid rain which can damage plants, accelerate the corrosion of metals and attack limestone, marble, mortar, etc. The harmful impact of this pollutant present in the atmosphere is also catastrophic in terms of global warming, ozone depletion and climate change.

Metal-Organic Frameworks (MOF) have been envisaged for the capture of H2S and SO2 however, some of them, with the main disadvantage of showing poor chemical stability. Thus, in this talk we present two MOF materials highly chemically-stable to H2S and SO2: MIL-53(Al)-TDC7 and MFM-300(Sc), respectively.

MIL-53(Al)-TDC is demonstrated to exhibit one of the highest H2S capture (18.5 mmol g-1 at 298 K and 1 bar) ever reported for a MOF, to the best of our knowledge, along with the retention of its crystalline structure after multiple H2S  adsorption/desorption cycles and an excellent regeneration at relatively low temperature. MFM-300(Sc) is demonstrated to exhibit a SO2 uptake of 9.4 mmol g-1 at 298 K and 1 bar significantly higher compared to its Al- and In-analogues, along with the retention of this level of performance after multiple SO2 adsorption/desorption cycles owing to the high stability of its crystalline structure. Advanced experimental and computational tools have been further coupled to gain insight into
the molecular mechanisms responsible for the adsorption of H2S and SO2.